Rising Damp Vs Penetrating Damp – The Difference Explained

Many homeowners are confused about rising and penetrating damp, both of which present a very real threat to London homes and a mistaken diagnosis could be costly. In this short article, we aim to add some clarity to the issue, so that you don’t misdiagnose a damp issue in your London home.

What is Rising Damp?

This is a term used to describe moisture that comes up from the ground, hence the name ‘rising damp’. This occurs because of capillary action, as the moisture is drawn into building materials like brickwork and timber and unless it is addressed, the damp will continue to spread through the brickwork and damage the property. Typically, buildings have a damp proof course that is fitted between the lower brickwork courses, which provides a waterproof barrier to prevent moisture passing and rising up the structure.

Damaged Damp Proof Course (DPC)

Rising damp can only occur if the DPC is damaged; it might be split due to ground movement, or it could have degraded over many years, which often happens with older London properties. Another way damp can rise up the side of a building is if an extension is added to the house without a DPC and the brickwork comes over the existing DPC, allowing moisture to make contact with brickwork above the DPC line. Terraced houses are particularly prone to rising damp; all it takes is for one property to be compromised and the damp would spread to the other houses.

What is Penetrating Damp?

This refers to damp that enters a building via the roof or the walls, which penetrates into the interior, causing considerable damage. Basically, if damp does not come from the ground, it is penetrating damp and before repairing any damage, it is important to carry out effective damp-proofing. A common cause of penetrating damp is a leaking roof, while blocked guttering can also lead to rainwater running down the external walls. Damaged masonry is another cause of damp damaging a building and if you suspect that your London home is under attack from damp, book an independent damp survey from London Damp Specialists and find out whether or not your home is being damaged by damp, mould or timber rot.

Independent Damp Survey

At London Damp Specialists, we have been inspecting London homes for many years, providing homeowners with detailed reports that cover every aspect of damp, mould and timber rot. There are different levels of damp survey, depending on your needs, plus we offer an additional plaster lab analysis service where we test up to 10 samples of plaster from various locations in the house.

All forms of damp cause property damage and if you are planning to buy a house in London, we recommend arranging for one of our certified damp surveyors to inspect the building, which will give you an accurate appraisal of the condition of the property, then you can make an informed decision about the purchase.

Damp Survey Costs

Transparent pricing with no hidden fees for our independent, unbiased surveys.

Level 1

Level 1

£199 + VAT

What’s included:

  • Inspection of walls
  • Inspection of floors
  • Inspection of ceilings
  • Leak inspection of drains and plumbing
  • Damp information and prevention guide
Level 2

Level 2

£299 + VAT

What’s included:

  • Everything in Level 1
  • Dry rot inspection
  • Wet rot inspection
  • Woodworm inspection
  • Damp information and prevention guide

 Survey Add Ons

Add On 1

£299 + VAT
Lab Analysis Of Plaster

Laboratory analysis Of plaster identifies hygroscopic salts such as chlorides and nitrates. which indicate whether damp is caused by rising groundwater or by plumbing leaks, This testing removes guesswork, allowing the exact source of moisture to be identified so the correct treatment is applied rather than carrying out unnecessary damp-proofing work.

Add to Survey

Add On 2

£299 + VAT
Mould Lab Swab Testing, qPCR on DNA

qPCR DNA mould testing detects microscopic mould spores that are invisible during a normal inspection and van remain hidden behind walls, floors. or inside building rkaterials. It identifies the exact mould species present and the contamination level, allowing hidden mould problems to be confirrned and properly treated before they affect the property or occupants’ health.

Add to Survey

Qualifications: All our surveyors are PCA and CSRT qualified for remedial treatments and also CSSW qualified for structural waterproofing.
Next day report: You will receive the report within 24 hours of the inspection taking place.

These are the tools we use

Damp Meter

Damp Meter

A damp meter is a diagnostic tool used to detect and measure moisture levels within building materials such as plaster, brick, timber, and concrete.

Borescope camera

Borescope camera

borescope camera is a small inspection camera attached to a flexible semi-rigid cable that allows you to see inside areas that are otherwise inaccessible.

Drone Inspection

Drone Inspection

A drone is a remotely operated aerial device equipped with a camera that allows visual inspection from above without the need for scaffolding or ladder.

Air Humidity Sensor

Air Humidity Sensor

Air humidity sensor measures the amount of moisture present in the air, expressed as relative humidity (RH) in percentage. It helps determine whether indoor conditions are contributing to condensation, mould growth, or damp-related issues.

Thermal Imaging Camera

Thermal Imaging Camera

A thermal imaging camera detects temperature differences on surfaces by using infrared technology to produce a heat map image. In damp investigations, it helps identify cold spots, moisture intrusion, insulation defects, thermal bridging and leaks.

Air Flow Ventilation Detector

Air Flow Ventilation Detector

An air flow ventilation detector measures the movement and volume of air passing through vents, extractor fans, and air bricks. It confirms whether ventilation systems are working properly and achieving adequate air changes within a room. Poor airflow leads to trapped moisture, high humidity, condensation on cold surfaces, and ultimately mould growth.

Mould Lab Swab Testing

Mould Lab Swab Testing

A mould swab test is carried out to confirm the presence of hidden mould growth and identify the specific species involved. Surface mould is not always visible, especially behind furniture, inside cavities, or within ventilation systems. Laboratory analysis of a swab sample determines whether active mould spores are present and what type they are, which helps assess potential health risks and decide the correct remediation approach rather than relying on visual assumption alone.

Lab Analysis of Plaster

Lab Analysis of Plaster

Laboratory analysis of plaster is used to identify the type of salts present within the material, typically chlorides and nitrates. The presence and concentration of these salts help determine whether the moisture source is consistent with rising damp, ground contamination, or another forms [sic] of water ingress. such as mains water leak, This removes guesswork and prevents misdiagnosis, ensuring the correct remedial treatment is specified rather than applying unnecessary or ineffective solutions.

 

Contact Us

If you have some questions, please complete this form:

Book and Pay for a survey

If you are ready to book a survey and pay, please complete this form:

Book Survey